Open Inventor Release 2024.1.3
 
Loading...
Searching...
No Matches
SoTransformerDragger Class Reference

Box-like object you scale, rotate, and translate by dragging with the mouse. More...

#include <Inventor/draggers/SoTransformerDragger.h>

+ Inheritance diagram for SoTransformerDragger:

Public Member Functions

virtual SoType getTypeId () const
 Returns the type identifier for this specific instance.
 
virtual const SoNodekitCataloggetNodekitCatalog () const
 Returns the SoNodekitCatalog for this instance.
 
 SoTransformerDragger ()
 Constructor.
 
void unsquishKnobs ()
 Tells the dragger to unsquish its rotation and scale knobs during the next traversal.
 
SbBool isLocateHighlighting ()
 Returns whether or not locate highlighting is used.
 
void setLocateHighlighting (SbBool onOff)
 Sets whether or not locate highlighting is used.
 
- Public Member Functions inherited from SoDragger
void addStartCallback (SoDraggerCB *f, void *userData=NULL)
 Adds start callback.
 
void removeStartCallback (SoDraggerCB *f, void *userData=NULL)
 Removes start callback.
 
void addMotionCallback (SoDraggerCB *f, void *userData=NULL)
 Adds motion callback.
 
void removeMotionCallback (SoDraggerCB *f, void *userData=NULL)
 Removes motion callback.
 
void addFinishCallback (SoDraggerCB *f, void *userData=NULL)
 Adds finish callback.
 
void removeFinishCallback (SoDraggerCB *f, void *userData=NULL)
 Removes finish callback.
 
void addValueChangedCallback (SoDraggerCB *f, void *userData=NULL)
 Adds value-changed callback.
 
void removeValueChangedCallback (SoDraggerCB *f, void *userData=NULL)
 Removes value-changed callback.
 
void setMinGesture (int pixels)
 Sets the number of pixels of movement required to initiate a constraint gesture.
 
void setMinGesture (float pixels)
 Float version of setMinGesture.
 
int getMinGesture () const
 Gets the number of pixels of movement required to initiate a constraint gesture.
 
float getMinGestureFloat () const
 Float version of getMinGesture.
 
SbBool enableValueChangedCallbacks (SbBool newVal)
 You can temporarily disable a dragger's valueChangedCallbacks.
 
void setTrackerDirectMode (TrackerDirectMode mode=DEFAULT)
 Sets the tracker direct mode for this dragger (see description above).
 
TrackerDirectMode getTrackerDirectMode () const
 Get the current tracker direct mode for this dragger.
 
void setMotionMatrix (const SbMatrix &newMatrix)
 Set the motion matrix.
 
const SbMatrixgetMotionMatrix ()
 Get the motion matrix.
 
- Public Member Functions inherited from SoInteractionKit
virtual SbBool setPartAsPath (const SbName &partName, SoPath *surrogatePath)
 Sets any public part in the interaction kit as a "surrogate" path instead.
 
virtual SbBool affectsState () const
 Returns TRUE if a node has an effect on the state during traversal.
 
- Public Member Functions inherited from SoBaseKit
 SoBaseKit ()
 Constructor.
 
virtual SoNodegetPart (const SbName &partName, SbBool makeIfNeeded)
 Searches the nodekit catalog (and those of all nested nodekits) for the part named partName.
 
template<typename PartType >
PartType * getPart (const SbName &partName)
 Like getPart(const SbName&,SbBool) but casts the returned part to the specified type and sets the makeIfNeeded parameter to TRUE.
 
template<typename PartType >
PartType * checkPart (const SbName &partName)
 Like getPart(const SbName&,SbBool) but casts the returned part to the specified type and sets the makeIfNeeded parameter to FALSE.
 
SbString getPartString (const SoBase *part)
 Given a node or a path to a node, checks if the part exists in the nodekit, in a nested nodekit, or an element of a list part.
 
virtual SoNodeKitPathcreatePathToPart (const SbName &partName, SbBool makeIfNeeded, const SoPath *pathToExtend=NULL)
 Returns a path that begins at this nodekit and ends at partName.
 
virtual SbBool setPart (const SbName &partName, SoNode *newPart)
 Inserts the given node (not a copy) as the new part specified by partName.
 
SoNONUNICODE SbBool set (char *nameValuePairListString)
 This function allows field values of parts (nodes) to be set in several different parts simultaneously.
 
SbBool set (const SbString &nameValuePairListString)
 This function allows field values of parts (nodes) to be set in several different parts simultaneously.
 
SoNONUNICODE SbBool set (const char *partNameString, const char *parameterString)
 This function allows field values of parts (nodes) to be set.
 
SbBool set (const SbString &partNameString, const SbString &parameterString)
 This function allows field values of parts (nodes) to be set.
 
- Public Member Functions inherited from SoNode
virtual void setOverride (const SbBool state)
 Turns the override flag on or off.
 
virtual SbBool isOverride () const
 Returns the state of the override flag.
 
virtual SoNodecopy (SbBool copyConnections=FALSE) const
 Creates and returns an exact copy of the node.
 
virtual void touch ()
 Marks an instance as modified, simulating a change to it.
 
- Public Member Functions inherited from SoFieldContainer
void setToDefaults ()
 Sets all fields in this object to their default values.
 
SbBool hasDefaultValues () const
 Returns TRUE if all of the object's fields have their default values.
 
SbBool fieldsAreEqual (const SoFieldContainer *fc) const
 Returns TRUE if this object's fields are exactly equal to fc's fields.
 
void copyFieldValues (const SoFieldContainer *fc, SbBool copyConnections=FALSE)
 Copies the contents of fc's fields into this object's fields.
 
SoNONUNICODE SbBool set (const char *fieldDataString)
 Sets one or more fields in this object to the values specified in the given string, which should be a string in the Open Inventor file format.
 
SbBool set (const SbString &fieldDataString)
 Sets one or more fields in this object to the values specified in the given string, which should be a string in the Open Inventor file format.
 
void get (SbString &fieldDataString)
 Returns the values of the fields of this object in the Open Inventor ASCII file format in the given string.
 
virtual int getFields (SoFieldList &list) const
 Appends references to all of this object's fields to resultList, and returns the number of fields appended.
 
virtual int getAllFields (SoFieldList &list) const
 Returns a list of fields, including the eventIn's and eventOut's.
 
virtual SoFieldgetField (const SbName &fieldName) const
 Returns a the field of this object whose name is fieldName.
 
virtual SoFieldgetEventIn (const SbName &fieldName) const
 Returns a the eventIn with the given name.
 
virtual SoFieldgetEventOut (const SbName &fieldName) const
 Returns the eventOut with the given name.
 
SbBool getFieldName (const SoField *field, SbName &fieldName) const
 Returns the name of the given field in the fieldName argument.
 
SbBool enableNotify (SbBool flag)
 Notification at this Field Container is enabled (if flag == TRUE) or disabled (if flag == FALSE).
 
SbBool isNotifyEnabled () const
 Notification is the process of telling interested objects that this object has changed.
 
virtual void setUserData (void *data)
 Sets application data.
 
void * getUserData (void) const
 Gets user application data.
 
- Public Member Functions inherited from SoBase
virtual SbName getName () const
 Returns the name of an instance.
 
virtual void setName (const SbName &name)
 Sets the name of an instance.
 
void setSynchronizable (const bool b)
 Sets this to be a ScaleViz synchronizable object.
 
bool isSynchronizable () const
 Gets the ScaleViz synchronizable state of this object.
 
- Public Member Functions inherited from SoRefCounter
void ref () const
 Adds a reference to an instance.
 
void unref () const
 Removes a reference from an instance.
 
void unrefNoDelete () const
 unrefNoDelete() should be called when it is desired to decrement the reference count, but not delete the instance if this brings the reference count to zero.
 
int getRefCount () const
 Returns current reference count.
 
void lock () const
 lock this instance.
 
void unlock () const
 unlock this instance.
 
- Public Member Functions inherited from SoTypedObject
SbBool isOfType (const SoType &type) const
 Returns TRUE if this object is of the type specified in type or is derived from that type.
 
template<typename TypedObjectClass >
SbBool isOfType () const
 Returns TRUE if this object is of the type of class TypedObjectClass or is derived from that class.
 
- Public Member Functions inherited from SoGetView
 SoGetView ()
 Default constructor.
 
virtual ~SoGetView ()
 
virtual SbBool getViewportIsEnabled () const
 Returns TRUE if SoGetView functionalities are enabled, FALSE otherwise.
 
virtual const SbVec2f getViewportOrigin () const
 Returns SbViewportRegion origin.
 
virtual const SbVec2f getViewportSize () const
 Returns SbViewportRegion size.
 

Static Public Member Functions

static SoType getClassTypeId ()
 Returns the type identifier for this class.
 
static const SoNodekitCataloggetClassNodekitCatalog ()
 Returns the SoNodekitCatalog for this class.
 
static void setColinearThreshold (int newVal)
 Sets the colinear threshold.
 
static int getColinearThreshold ()
 Returns the colinear threshold.
 
- Static Public Member Functions inherited from SoDragger
static SoType getClassTypeId ()
 Returns the type identifier for this class.
 
static const SoNodekitCataloggetClassNodekitCatalog ()
 Returns the SoNodekitCatalog for this class.
 
static void setMinScale (float newMinScale)
 Sets the smallest scale that any dragger will write.
 
static float getMinScale ()
 Gets the smallest scale that any dragger will write.
 
static void setInitialTrackerDirectMode (TrackerDirectMode mode=DEFAULT)
 Set the initial tracker direct mode for draggers not yet created.
 
static TrackerDirectMode getInitialTrackerDirectMode ()
 Get the initial tracker direct mode.
 
- Static Public Member Functions inherited from SoInteractionKit
static SoType getClassTypeId ()
 Returns the type identifier for this class.
 
static const SoNodekitCataloggetClassNodekitCatalog ()
 Returns the SoNodekitCatalog for this class.
 
- Static Public Member Functions inherited from SoBaseKit
static SoType getClassTypeId ()
 Returns the type identifier for this class.
 
static const SoNodekitCataloggetClassNodekitCatalog ()
 Returns the SoNodekitCatalog for the class SoBaseKit.
 
static void setSearchingChildren (SbBool newVal)
 Sets if nodekit children are searched during SoSearchAction traversal.
 
static SbBool isSearchingChildren ()
 Returns TRUE if nodekit children are searched during SoSearchAction traversal.
 
- Static Public Member Functions inherited from SoNode
static SoType getClassTypeId ()
 Returns the type identifier for this class.
 
static SoNodegetByName (const SbName &name)
 A node's name can be set using SoBase::setName().
 
static int getByName (const SbName &name, SoNodeList &list)
 A node's name can be set using SoBase::setName().
 
- Static Public Member Functions inherited from SoFieldContainer
static SoType getClassTypeId ()
 Returns the type of this class.
 
- Static Public Member Functions inherited from SoBase
static SoType getClassTypeId ()
 Returns type identifier for this class.
 
- Static Public Member Functions inherited from SoTypedObject
static SoType getClassTypeId ()
 Returns the type identifier for this class.
 

Public Attributes

SoSFRotation rotation
 Orientation of the dragger.
 
SoSFVec3f translation
 Position of the dragger.
 
SoSFVec3f scaleFactor
 Scale of the dragger.
 
SoSFFloat minDiscRotDot
 Specifies the minimum dot product between eyeDir and rotPlane normal before switching from record-player-type rotation to rolling-pin-type rotation.
 
- Public Attributes inherited from SoDragger
SoSFBool isActive
 TRUE when mouse is down and dragging, else FALSE.
 
SoSFBool enableCallbacks
 If set to FALSE, motion, start and finish callbacks are disabled.
 
- Public Attributes inherited from SoInteractionKit
SoSFEnum boundingBoxCaching
 Set bounding box caching mode.
 
SoSFEnum renderCulling
 Set render culling mode.
 
SoSFEnum pickCulling
 Set pick caching mode.
 
SoDEPRECATED SoSFEnum renderCaching
 Set render caching mode.
 
- Public Attributes inherited from SoBaseKit
SoSFBool boundingBoxIgnoring
 Whether to ignore this node during bounding box traversal.
 

Additional Inherited Members

- Public Types inherited from SoDragger
enum  TrackerDirectMode {
  NONE ,
  MOVE ,
  ROTATE ,
  FREE ,
  DEFAULT
}
 Tracker direct mode. More...
 
typedef void SoDraggerCB(void *userData, SoDragger *dragger)
 Used in defining the callback function lists.
 
- Public Types inherited from SoInteractionKit
enum  CacheEnabled {
  OFF ,
  ON ,
  AUTO
}
 Possible values for caching. More...
 

Detailed Description

Box-like object you scale, rotate, and translate by dragging with the mouse.

SoTransformerDragger is a dragger shaped like a box. It has small cubes at the corners and small balls sticking out of the middle of each face. Click and drag any face of the box for 2D translation in the plane of that face. Drag any corner-cube to scale the box uniformly. Pick any of the mid-face balls to rotate the whole dragger about its center.

The SoTransformerDragger uses locate highlighting, so you can tell which part you are about to select before pressing the mouse button. By default, the locate highlight color is gold.
NOTE: Locate highlighting (mouse-over feedback) is disabled by default and the setLocateHighlighting() method has no effect. To enable locate highlighting, use SoPreferences to set the environment variable IV_ALLOW_LOCATE_HIGHLIGHT to true.

Click-drag any face to translate the dragger within the plane of that face. The face you selected will highlight in yellow. While you drag, yellow feedback arrows display the two directions of motion. Press the <Shift> key and the arrows turn orange; you may now pick between these two directions to constrain the motion. The direction you move the cursor in will determine which direction is chosen. Press the <Control> key and the dragger will translate perpendicular to that plane. The translation field is modified as the face is dragged.

Click a corner to scale the dragger. The corner you selected will turn yellow and radial lines will indicate that you may move toward and away from the center of the box. Drag radially and you will perform uniform scale. Press the <Control> key to scale about the opposite corner instead of the center of the box.

The Control key behavior may be disabled by setting the environment variable OIV_DISABLE_DRAGGER_CTRL_KEY to false (see SoPreferences).

To stretch the dragger non-uniformly, press <Shift> when you drag the corner cube. Now you will see three orange arrows indicating that your gesture will determine which direction to choose. Move the cursor and the selected arrow will turn yellow while the others disappear. Now the dragger will stretch only in the direction you selected. Pressing <Control> at the same time as <Shift> allows you to stretch the dragger while keeping the opposite side pinned in place. When you drag a corner, this modifies the scaleFactor and possibly the translation field of the dragger.

Click one of the spherical knobs to rotate the dragger. When you first click, you'll see two orange lines and two purple circles. The purple circles indicate the two ways you can rotate. The orange lines are, once again, the two choices for your mouse gesture. Each line begins you moving around one of the two circles. Once you move the cursor far enough, the selected line turns yellow and you begin rotating the dragger about the selected circle. The other circle and line will disappear.

To perform unconstrained ("free") rotation, just press <Shift> while you drag the spherical knob. There will be no choices; instead all three purple circles will be displayed, forming a ball that you can roll around. Regardless of how you rotate, dragging the spherical knobs will modify the rotation field of the dragger. Depending on how it is centered and what transforms precede it in the scene graph, rotation is likely to affect the translation and scaleFactor fields as well.

Pressing the <Control> key will change the center of rotation in both the constrained and unconstrained (<Shift>) case. By default, rotation occurs about the center of the bounding box. With <Control> depressed, rotation occurs about the middle of the opposite side of the bounding box. The purple feedback will change to illustrate this; the feedback circles increase in size and purple crosshairs sprout at the new rotational center.

Ordinarily, the knobs of the dragger are unsquished upon readin from file and when the mouse button is released at the end of a drag. If you want this to happen more often, then you should call the method unsquishKnobs().

As with all draggers, if you change the fields the dragger will move to match the new settings.

Remember: This is not an SoTransform ! . If you want to move other objects with this dragger, you can either:

You can change the parts in any instance of this dragger using setPart(). The default part geometries are defined as resources for this SoTransformerDragger class. They are detailed in the Dragger Resources section of the online reference page for this class. You can make your program use different default resources for the parts by copying the file $OIVHOME/data/draggerDefaults/transformerDragger.iv into your own directory, editing the file, and then setting the environment variable SO_DRAGGER_DIR to be a path to that directory.

This dragger has both a default and a WYSIWYG version:

Default Dragger WYSIWYG Dragger

See SoDragger for more information about using and customizing draggers, including code examples, using draggers in an immersive VR environment and using WYSIWYG draggers.

FILE FORMAT/DEFAULT

    TransformerDragger {
    boundingBoxCaching AUTO
    renderCulling AUTO
    pickCulling AUTO
    isActive FALSE
    translation 0 0 0
    scaleFactor 1 1 1
    rotation 0 0 1 0
    minDiscRotDot 0.025
    callbackList NULL
    surroundScale NULL
    translator1 <transformerTranslator1 resource>
    translator1Active <transformerTranslator1Active resource>
    translator2 <transformerTranslator2 resource>
    translator2Active <transformerTranslator2Active resource>
    translator3 <transformerTranslator3 resource>
    translator3Active <transformerTranslator3Active resource>
    translator4 <transformerTranslator4 resource>
    translator4Active <transformerTranslator4Active resource>
    translator5 <transformerTranslator5 resource>
    translator5Active <transformerTranslator5Active resource>
    translator6 <transformerTranslator6 resource>
    translator6Active <transformerTranslator6Active resource>
    rotator1 <transformerRotator1 resource>
    rotator1Active <transformerRotator1Active resource>
    rotator2 <transformerRotator2 resource>
    rotator2Active <transformerRotator2Active resource>
    rotator3 <transformerRotator3 resource>
    rotator3Active <transformerRotator3Active resource>
    rotator4 <transformerRotator4 resource>
    rotator4Active <transformerRotator4Active resource>
    rotator5 <transformerRotator5 resource>
    rotator5Active <transformerRotator5Active resource>
    rotator6 <transformerRotator6 resource>
    rotator6Active <transformerRotator6Active resource>
    scale1 <transformerScale1 resource>
    scale1Active <transformerScale1Active resource>
    scale2 <transformerScale2 resource>
    scale2Active <transformerScale2Active resource>
    scale3 <transformerScale3 resource>
    scale3Active <transformerScale3Active resource>
    scale4 <transformerScale4 resource>
    scale4Active <transformerScale4Active resource>
    scale5 <transformerScale5 resource>
    scale5Active <transformerScale5Active resource>
    scale6 <transformerScale6 resource>
    scale6Active <transformerScale6Active resource>
    scale7 <transformerScale7 resource>
    scale7Active <transformerScale7Active resource>
    scale8 <transformerScale8 resource>
    scale8Active <transformerScale8Active resource>
    xAxisFeedbackActive <transformerXAxisFeedbackActive resource>
    xAxisFeedbackSelect <transformerXAxisFeedbackSelect resource>
    xCrosshairFeedback <transformerXCrosshairFeedback resource>
    yAxisFeedbackActive <transformerYAxisFeedbackActive resource>
    yAxisFeedbackSelect <transformerYAxisFeedbackSelect resource>
    yCrosshairFeedback <transformerYCrosshairFeedback resource>
    zAxisFeedbackActive <transformerZAxisFeedbackActive resource>
    zAxisFeedbackSelect <transformerZAxisFeedbackSelect resource>
    zCrosshairFeedback <transformerZCrosshairFeedback resource>
    translateBoxFeedback <transformerTranslateBoxFeedback resource>
    scaleBoxFeedback <transformerScaleBoxFeedback resource>
    posXWallFeedback <transformerPosXWallFeedback resource>
    posXRoundWallFeedback <transformerPosXRoundWallFeedback resource>
    posYWallFeedback <transformerPosYWallFeedback resource>
    posYRoundWallFeedback <transformerPosYRoundWallFeedback resource>
    posZWallFeedback <transformerPosZWallFeedback resource>
    posZRoundWallFeedback <transformerPosZRoundWallFeedback resource>
    negXWallFeedback <transformerNegXWallFeedback resource>
    negXRoundWallFeedback <transformerNegXRoundWallFeedback resource>
    negYWallFeedback <transformerNegYWallFeedback resource>
    negYRoundWallFeedback <transformerNegYRoundWallFeedback resource>
    negZWallFeedback <transformerNegZWallFeedback resource>
    negZRoundWallFeedback <transformerNegZRoundWallFeedback resource>
    radialFeedback <transformerRadialFeedback resource>
    xCircleFeedback <transformerXCircleFeedback resource>
    yCircleFeedback <transformerYCircleFeedback resource>
    zCircleFeedback <transformerZCircleFeedback resource>
    none <transformerLocateMaterial resource>
    }

DRAGGER RESOURCES

    Resource: transformerLocateMaterial
    Part: none
    Appearance: Gold diffuse and emissive color
    Description: Locate highlight color used for all parts.

    Resource: transformerOverallStyle
    Part: overallStyle
    Appearance: White Low-Complexity lines
    Description: If nothing else specified, this is style of the part.

    Resource: transformerTranslator1
    Part: translator1
    Appearance: White Line-Style Square
    Description: Top face of transformer. Picking this initiates translation in x-z plane.

    Resource: transformerTranslator2
    Part: translator2
    Appearance: White Line-Style Square
    Description: Bottom face of transformer. Picking this initiates translation in x-z plane.

    Resource: transformerTranslator3
    Part: translator3
    Appearance: White Line-Style Square
    Description: Left face of transformer. Picking this initiates translation in y-z plane.

    Resource: transformerTranslator4
    Part: translator4
    Appearance: White Line-Style Square
    Description: Right face of transformer. Picking this initiates translation in y-z plane.

    Resource: transformerTranslator5
    Part: translator5
    Appearance: White Line-Style Square
    Description: Front face of transformer. Picking this initiates translation in x-y plane.

    Resource: transformerTranslator6
    Part: translator6
    Appearance: White Line-Style Square
    Description: Back face of transformer. Picking this initiates translation in x-y plane.

    Resource: transformerTranslator1Active
    Part: translator1Active
    Appearance: Yellow version of transformerTranslator1
    Description: Replaces transformerTranslator1 during dragging.

    Resource: transformerTranslator2Active
    Part: translator2Active
    Appearance: Yellow version of transformerTranslator2
    Description: Replaces transformerTranslator2 during dragging.

    Resource: transformerTranslator3Active
    Part: translator3Active
    Appearance: Yellow version of transformerTranslator3
    Description: Replaces transformerTranslator3 during dragging.

    Resource: transformerTranslator4Active
    Part: translator4Active
    Appearance: Yellow version of transformerTranslator4
    Description: Replaces transformerTranslator4 during dragging.

    Resource: transformerTranslator5Active
    Part: translator5Active
    Appearance: Yellow version of transformerTranslator5
    Description: Replaces transformerTranslator5 during dragging.

    Resource: transformerTranslator6Active
    Part: translator6Active
    Appearance: Yellow version of transformerTranslator6
    Description: Replaces transformerTranslator6 during dragging.

    Resource: transformerRotator1
    Part: rotator1
    Appearance: Green Sphere at end of a stick
    Description: Top knob of transformer. Picking this initiates rotation.

    Resource: transformerRotator2
    Part: rotator2
    Appearance: Green Sphere at end of a stick
    Description: Bottom knob of transformer. Picking this initiates rotation.

    Resource: transformerRotator3
    Part: rotator3
    Appearance: Green Sphere at end of a stick
    Description: Left knob of transformer. Picking this initiates rotation.

    Resource: transformerRotator4
    Part: rotator4
    Appearance: Green Sphere at end of a stick
    Description: Right knob of transformer. Picking this initiates rotation.

    Resource: transformerRotator5
    Part: rotator5
    Appearance: Green Sphere at end of a stick
    Description: Front knob of transformer. Picking this initiates rotation.

    Resource: transformerRotator6
    Part: rotator6
    Appearance: Green Sphere at end of a stick
    Description: Back knob of transformer. Picking this initiates rotation.

    Resource: transformerRotator1Active
    Part: rotator1Active
    Appearance: Yellow version of transformerRotator1
    Description: Replaces transformerRotator1 during dragging.

    Resource: transformerRotator2Active
    Part: rotator2Active
    Appearance: Yellow version of transformerRotator2
    Description: Replaces transformerRotator2 during dragging.

    Resource: transformerRotator3Active
    Part: rotator3Active
    Appearance: Yellow version of transformerRotator3
    Description: Replaces transformerRotator3 during dragging.

    Resource: transformerRotator4Active
    Part: rotator4Active
    Appearance: Yellow version of transformerRotator4
    Description: Replaces transformerRotator4 during dragging.

    Resource: transformerRotator5Active
    Part: rotator5Active
    Appearance: Yellow version of transformerRotator5
    Description: Replaces transformerRotator5 during dragging.

    Resource: transformerRotator6Active
    Part: rotator6Active
    Appearance: Yellow version of transformerRotator6
    Description: Replaces transformerRotator6 during dragging.

    Resource: transformerScale1
    Part: scale1
    Appearance: Small white cube in (+x+y+z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale2
    Part: scale2
    Appearance: Small white cube in (+x+y-z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale3
    Part: scale3
    Appearance: Small white cube in (+x-y+z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale4
    Part: scale4
    Appearance: Small white cube in (+x-y-z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale5
    Part: scale5
    Appearance: Small white cube in (-x+y+z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale6
    Part: scale6
    Appearance: Small white cube in (-x+y-z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale7
    Part: scale7
    Appearance: Small white cube in (-x-y+z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale8
    Part: scale8
    Appearance: Small white cube in (-x-y-z) corner of transformer
    Description: Picking this initiates scaling.

    Resource: transformerScale1Active
    Part: scale1Active
    Appearance: Yellow version of transformerScale1Active
    Description: Replaces transformerScale1Active during dragging.

    Resource: transformerScale2Active
    Part: scale2Active
    Appearance: Yellow version of transformerScale2Active
    Description: Replaces transformerScale2Active during dragging.

    Resource: transformerScale3Active
    Part: scale3Active
    Appearance: Yellow version of transformerScale3Active
    Description: Replaces transformerScale3Active during dragging.

    Resource: transformerScale4Active
    Part: scale4Active
    Appearance: Yellow version of transformerScale4Active
    Description: Replaces transformerScale4Active during dragging.

    Resource: transformerScale5Active
    Part: scale5Active
    Appearance: Yellow version of transformerScale5Active
    Description: Replaces transformerScale5Active during dragging.

    Resource: transformerScale6Active
    Part: scale6Active
    Appearance: Yellow version of transformerScale6Active
    Description: Replaces transformerScale6Active during dragging.

    Resource: transformerScale7Active
    Part: scale7Active
    Appearance: Yellow version of transformerScale7Active
    Description: Replaces transformerScale7Active during dragging.

    Resource: transformerScale8Active
    Part: scale8Active
    Appearance: Yellow version of transformerScale8Active
    Description: Replaces transformerScale8Active during dragging.

    Resource: transformerXAxisFeedbackActive
    Part: xAxisFeedbackActive
    Appearance: Yellow arrow along X axis
    Description: Displayed when translating if X direction is permitted.

    Resource: transformerXAxisFeedbackSelect
    Part: xAxisFeedbackSelect
    Appearance: Orange arrow along X axis
    Description: Displayed when awaiting gesture to pick between X axis and another direction(s).

    Resource: transformerYAxisFeedbackActive
    Part: yAxisFeedbackActive
    Appearance: Yellow arrow along Y axis
    Description: Displayed when translating if Y direction is permitted.

    Resource: transformerYAxisFeedbackSelect
    Part: yAxisFeedbackSelect
    Appearance: Orange arrow along Y axis
    Description: Displayed when awaiting gesture to pick between Y axis and another direction(s).

    Resource: transformerZAxisFeedbackActive
    Part: zAxisFeedbackActive
    Appearance: Yellow arrow along Z axis
    Description: Displayed when translating if Z direction is permitted.

    Resource: transformerZAxisFeedbackSelect
    Part: zAxisFeedbackSelect
    Appearance: Orange arrow along Z axis
    Description: Displayed when awaiting gesture to pick between Z axis and another direction(s).

    Resource: transformerXCrosshairFeedback
    Part: xCrosshairFeedback
    Appearance: Yellow crossHair in y-z plane
    Description: Displayed when translating perpendicular to y-z plane.

    Resource: transformerYCrosshairFeedback
    Part: yCrosshairFeedback
    Appearance: Yellow crossHair in x-z plane
    Description: Displayed when translating perpendicular to x-z plane.

    Resource: transformerZCrosshairFeedback
    Part: zCrosshairFeedback
    Appearance: Yellow crossHair in x-y plane
    Description: Displayed when translating perpendicular to x-y plane.

    Resource: transformerXCircleFeedback
    Part: xCircleFeedback
    Appearance: Purple Unit Circle about X axis
    Description: Displayed when rotating about X axis

    Resource: transformerYCircleFeedback
    Part: yCircleFeedback
    Appearance: Purple Unit Circle about Y axis
    Description: Displayed when rotating about Y axis

    Resource: transformerZCircleFeedback
    Part: zCircleFeedback
    Appearance: Purple Unit Circle about Z axis
    Description: Displayed when rotating about Z axis

    Resource: transformerRadialFeedback
    Part: radialFeedback
    Appearance: Purple Rays emanating from center through corners
    Description: Displayed when scaling uniformly about center.

    Resource: transformerTranslateBoxFeedback
    Part: translateBoxFeedback
    Appearance: Purple Box with one bright yellow side
    Description: Displayed when translating. Automatically oriented so yellow side matches selected face.

    Resource: transformerPosXWallFeedback
    Part: posXWallFeedback
    Appearance: Purple Plane along Right side of transformer
    Description: Displayed when <Control> scaling and keeping right side fixed.

    Resource: transformerPosYWallFeedback
    Part: posYWallFeedback
    Appearance: Purple Plane along Top side of transformer
    Description: Displayed when <Control> scaling and keeping top side fixed.

    Resource: transformerPosZWallFeedback
    Part: posZWallFeedback
    Appearance: Purple Plane along Front side of transformer
    Description: Displayed when <Control> scaling and keeping front side fixed.

    Resource: transformerNegXWallFeedback
    Part: negXWallFeedback
    Appearance: Purple Plane along Left side of transformer
    Description: Displayed when <Control> scaling and keeping left side fixed.

    Resource: transformerNegYWallFeedback
    Part: negYWallFeedback
    Appearance: Purple Plane along Bottom side of transformer
    Description: Displayed when <Control> scaling and keeping bottom side fixed.

    Resource: transformerNegZWallFeedback
    Part: negZWallFeedback
    Appearance: Purple Plane along Back side of transformer
    Description: Displayed when <Control> scaling and keeping back side fixed.

CATALOG PARTS

    All Parts
    Part Name Part Type Default Type NULL Default
    callbackList NodeKitListPart yes
    surroundScale SurroundScale yes
    translator1 Separator yes
    translator1Active Separator yes
    translator2 Separator yes
    translator2Active Separator yes
    translator3 Separator yes
    translator3Active Separator yes
    translator4 Separator yes
    translator4Active Separator yes
    translator5 Separator yes
    translator5Active Separator yes
    translator6 Separator yes
    translator6Active Separator yes
    rotator1 Separator yes
    rotator1Active Separator yes
    rotator2 Separator yes
    rotator2Active Separator yes
    rotator3 Separator yes
    rotator3Active Separator yes
    rotator4 Separator yes
    rotator4Active Separator yes
    rotator5 Separator yes
    rotator5Active Separator yes
    rotator6 Separator yes
    rotator6Active Separator yes
    scale1 Separator yes
    scale1Active Separator yes
    scale2 Separator yes
    scale2Active Separator yes
    scale3 Separator yes
    scale3Active Separator yes
    scale4 Separator yes
    scale4Active Separator yes
    scale5 Separator yes
    scale5Active Separator yes
    scale6 Separator yes
    scale6Active Separator yes
    scale7 Separator yes
    scale7Active Separator yes
    scale8 Separator yes
    scale8Active Separator yes
    xAxisFeedbackActive Separator yes
    xAxisFeedbackSelect Separator yes
    xCrosshairFeedback Separator yes
    yAxisFeedbackActive Separator yes
    yAxisFeedbackSelect Separator yes
    yCrosshairFeedback Separator yes
    zAxisFeedbackActive Separator yes
    zAxisFeedbackSelect Separator yes
    zCrosshairFeedback Separator yes
    translateBoxFeedback Separator yes
    scaleBoxFeedback Separator yes
    posXWallFeedback Separator yes
    posXRoundWallFeedback Separator yes
    posYWallFeedback Separator yes
    posYRoundWallFeedback Separator yes
    posZWallFeedback Separator yes
    posZRoundWallFeedback Separator yes
    negXWallFeedback Separator yes
    negXRoundWallFeedback Separator yes
    negYWallFeedback Separator yes
    negYRoundWallFeedback Separator yes
    negZWallFeedback Separator yes
    negZRoundWallFeedback Separator yes
    radialFeedback Separator yes
    xCircleFeedback Separator yes
    yCircleFeedback Separator yes
    zCircleFeedback Separator yes

    Extra Information for List Parts from Above Table

    Part Name Container Type Possible Types
    callbackList Separator Callback, EventCallback

SEE ALSO

SoDragger, SoInteractionKit, SoLocateHighlight, SoCenterballDragger, SoDirectionalLightDragger, SoDragPointDragger, SoHandleBoxDragger, SoJackDragger, SoPointLightDragger, SoRotateCylindricalDragger, SoRotateDiscDragger, SoRotateSphericalDragger, SoScale1Dragger, SoScale2Dragger, SoScale2UniformDragger, SoScaleUniformDragger, SoSpotLightDragger, SoTabBoxDragger, SoTabPlaneDragger, SoTrackballDragger, SoTransformBoxDragger, SoTranslate1Dragger, SoTranslate2Dragger

Definition at line 688 of file SoTransformerDragger.h.

Constructor & Destructor Documentation

◆ SoTransformerDragger()

SoTransformerDragger::SoTransformerDragger ( )

Constructor.

Member Function Documentation

◆ getClassNodekitCatalog()

static const SoNodekitCatalog * SoTransformerDragger::getClassNodekitCatalog ( )
static

Returns the SoNodekitCatalog for this class.

◆ getClassTypeId()

static SoType SoTransformerDragger::getClassTypeId ( )
static

Returns the type identifier for this class.


◆ getColinearThreshold()

static int SoTransformerDragger::getColinearThreshold ( )
static

Returns the colinear threshold.

This parameter determines the number of pixels that must separate two axes before they are regarded as distinct.

◆ getNodekitCatalog()

virtual const SoNodekitCatalog * SoTransformerDragger::getNodekitCatalog ( ) const
virtual

Returns the SoNodekitCatalog for this instance.

Reimplemented from SoDragger.

◆ getTypeId()

virtual SoType SoTransformerDragger::getTypeId ( ) const
virtual

Returns the type identifier for this specific instance.

Reimplemented from SoDragger.

◆ isLocateHighlighting()

SbBool SoTransformerDragger::isLocateHighlighting ( )
inline

Returns whether or not locate highlighting is used.

Definition at line 882 of file SoTransformerDragger.h.

◆ setColinearThreshold()

static void SoTransformerDragger::setColinearThreshold ( int  newVal)
static

Sets the colinear threshold.

When picking a direction for constraining based on gesture, this parameter determines how many pixels must separate two axes before they are regarded as distinct. If they are deemed "the same" then the shorter of the two will be discarded. Default is 4.

◆ setLocateHighlighting()

void SoTransformerDragger::setLocateHighlighting ( SbBool  onOff)

Sets whether or not locate highlighting is used.

Default is TRUE.

Note that this method has no effect unless unless locate highlighting is globally enabled by setting the environment variable IV_ALLOW_LOCATE_HIGHLIGHT to true (see SoPreferences).

◆ unsquishKnobs()

void SoTransformerDragger::unsquishKnobs ( )

Tells the dragger to unsquish its rotation and scale knobs during the next traversal.

Ordinarily, the knobs are only unsquished upon readin from file and when the mouse button is released at the end of a drag. If you want this to happen more often, then you should call this method.

Member Data Documentation

◆ minDiscRotDot

SoSFFloat SoTransformerDragger::minDiscRotDot

Specifies the minimum dot product between eyeDir and rotPlane normal before switching from record-player-type rotation to rolling-pin-type rotation.

This transition is made so that rotations don't get screwy when the circle is edge-on. Lies in range [0-1]. Best to leave this alone.

Definition at line 869 of file SoTransformerDragger.h.

◆ rotation

SoSFRotation SoTransformerDragger::rotation

Orientation of the dragger.

Definition at line 851 of file SoTransformerDragger.h.

◆ scaleFactor

SoSFVec3f SoTransformerDragger::scaleFactor

Scale of the dragger.

Definition at line 861 of file SoTransformerDragger.h.

◆ translation

SoSFVec3f SoTransformerDragger::translation

Position of the dragger.

Definition at line 856 of file SoTransformerDragger.h.


The documentation for this class was generated from the following file: