Clips a volume using a 2D surface. More...

#include <VolumeViz/nodes/SoUniformGridClipping.h>

Inheritance diagram for SoUniformGridClipping:

Public Types
enum	Axis { X , Y , Z }
	Slice Axis. More...

Public Types inherited from SoTexture2
enum	Loading { AUTO = 0 , MANUAL }
	Loading mode. More...

typedef void	SoTexture2CB(void userData, SoTexture2 tex)

Public Types inherited from SoTexture
enum	InternalFormat { AUTO_INTERNAL_FORMAT , ALPHA_FORMAT , ALPHA4 , ALPHA8 , ALPHA12 , ALPHA16 , LUMINANCE_FORMAT , LUMINANCE4 , LUMINANCE8 , LUMINANCE12 , LUMINANCE16 , LUMINANCE_ALPHA , LUMINANCE4_ALPHA4 , LUMINANCE6_ALPHA2 , LUMINANCE8_ALPHA8 , LUMINANCE12_ALPHA4 , LUMINANCE12_ALPHA12 , LUMINANCE16_ALPHA16 , INTENSITY_FORMAT , INTENSITY4 , INTENSITY8 , INTENSITY12 , INTENSITY16 , R3_G3_B2 , RGB_FORMAT , RGB4 , RGB5 , RG8 , RGB8 , RGB10 , RGB12 , RGB16 , RGBA_FORMAT , RGBA2 , RGBA4 , RGB5_ALPHA1 , RGBA8 , RGB10_ALPHA2 , RGBA12 , RGBA16 , RGBA_FLOAT32 , RGB_FLOAT32 , ALPHA_FLOAT32 , INTENSITY_FLOAT32 , LUMINANCE_FLOAT32 , LUMINANCE_ALPHA_FLOAT32 , RGBA_FLOAT16 , RGB_FLOAT16 , ALPHA_FLOAT16 , INTENSITY_FLOAT16 , LUMINANCE_FLOAT16 , LUMINANCE_ALPHA_FLOAT16 , COMPRESSED_ALPHA , COMPRESSED_LUMINANCE , COMPRESSED_LUMINANCE_ALPHA , COMPRESSED_INTENSITY , COMPRESSED_RGB , COMPRESSED_RGBA , COMPRESSED_LUMINANCE_LATC1 , COMPRESSED_SIGNED_LUMINANCE_LATC1 , COMPRESSED_LUMINANCE_ALPHA_LATC2 , COMPRESSED_SIGNED_LUMINANCE_ALPHA_LATC2 , COMPRESSED_RED_RGTC1 , COMPRESSED_SIGNED_RED_RGTC1 , COMPRESSED_RED_GREEN_RGTC2 , COMPRESSED_SIGNED_RED_GREEN_RGTC2 , DEPTH_COMPONENT16 , DEPTH_COMPONENT24 , DEPTH24_STENCIL8 , R8I , R8UI , R16I , R16UI , R32I , R32UI , RG8I , RG8UI , RG16I , RG16UI , RG32I , RG32UI , RGB8I , RGB8UI , RGB16I , RGB16UI , RGB32I , RGB32UI , RGBA8I , RGBA8UI , RGBA16I , RGBA16UI , RGBA32I , RGBA32UI }
	Texture internal storage format. More...

enum	Model { MODULATE = SbEnums::TEX_MODEL_MODULATE , DECAL = SbEnums::TEX_MODEL_DECAL , BLEND = SbEnums::TEX_MODEL_BLEND , REPLACE = SbEnums::TEX_MODEL_REPLACE , ADD = SbEnums::TEX_MODEL_ADD , COMBINE = SbEnums::TEX_MODEL_COMBINE }
	Texture Combiner Functions. More...

enum	Wrap { REPEAT = SbEnums::TEX_ADDRESS_REPEAT , CLAMP = SbEnums::TEX_ADDRESS_CLAMP , CLAMP_TO_BORDER = SbEnums::TEX_ADDRESS_CLAMP_BORDER , CLAMP_TO_EDGE = SbEnums::TEX_ADDRESS_CLAMP_TO_EDGE , MIRRORED_REPEAT = SbEnums::TEX_ADDRESS_MIRROR_REPEAT }
	Texture wrap type. More...

enum	Filter { AUTO = SbEnums::TEX_FILTER_AUTO , NEAREST = SbEnums::TEX_FILTER_NEAREST , LINEAR = SbEnums::TEX_FILTER_LINEAR , NEAREST_MIPMAP_NEAREST = SbEnums::TEX_FILTER_NEAREST_MIPMAP_NEAREST , NEAREST_MIPMAP_LINEAR = SbEnums::TEX_FILTER_NEAREST_MIPMAP_LINEAR , LINEAR_MIPMAP_NEAREST = SbEnums::TEX_FILTER_LINEAR_MIPMAP_NEAREST , LINEAR_MIPMAP_LINEAR = SbEnums::TEX_FILTER_LINEAR_MIPMAP_LINEAR }
	Specifies the OpenGL filtering method for minification and magnification. More...

enum	HW_Feature { HW_NPOT = 0 , HW_FLOATFORMAT , HW_DEPTHFORMAT , HW_AUTOMIPMAP , HW_BORDER_CLAMP , HW_EDGE_CLAMP , HW_MIRRORED_REPEAT , HW_COMPRESSION_S3TC , HW_COMPRESSION_LATC , HW_COMPRESSION_RGTC }

enum	FileType { UNKNOWN , RGB , SGI , TIFF , GIF , JPEG , BMP , PNG , JPEG2000 , PGX , PNM , RAS , DDS , HDRI , NUM_FILETYPES }
	File Type possible values. More...

Public Member Functions
virtual SoType	getTypeId () const
	Returns the type identifier for this specific instance.

	SoUniformGridClipping ()
	Constructor.

Public Member Functions inherited from SoTexture2
void	setStartLoadingCallback (SoTexture2CB cb, void userData)
	Callback invoked when starting to load the texture.

void	setFinishLoadingCallback (SoTexture2CB cb, void userData)
	Callback invoked when the texture is loaded and ready to use.

void	loadTexture ()
	Loads the texture if the loadingMode field is set to MANUAL.

	SoTexture2 ()
	Creates a texture node with default settings.

Public Member Functions inherited from SoTexture
void	setBitmapFileType (FileType in_type)
	Sets the texture file format.

FileType	getBitmapFileType (void)
	Gets the texture file format.

virtual void	setOverride (const SbBool state)
	Set the state of the override field.

virtual SbBool	isOverride () const
	Returns the state of the override field.

Public Member Functions inherited from SoNode
virtual SoNode *	copy (SbBool copyConnections=FALSE) const
	Creates and returns an exact copy of the node.

virtual SbBool	affectsState () const
	Returns TRUE if a node has an effect on the state during traversal.

virtual void	touch ()
	Marks an instance as modified, simulating a change to it.

Public Member Functions inherited from SoFieldContainer
void	setToDefaults ()
	Sets all fields in this object to their default values.

SbBool	hasDefaultValues () const
	Returns TRUE if all of the object's fields have their default values.

SbBool	fieldsAreEqual (const SoFieldContainer *fc) const
	Returns TRUE if this object's fields are exactly equal to fc's fields.

void	copyFieldValues (const SoFieldContainer *fc, SbBool copyConnections=FALSE)
	Copies the contents of fc's fields into this object's fields.

SoNONUNICODE SbBool	set (const char *fieldDataString)
	Sets one or more fields in this object to the values specified in the given string, which should be a string in the Open Inventor file format.

SbBool	set (const SbString &fieldDataString)
	Sets one or more fields in this object to the values specified in the given string, which should be a string in the Open Inventor file format.

void	get (SbString &fieldDataString)
	Returns the values of the fields of this object in the Open Inventor ASCII file format in the given string.

virtual int	getFields (SoFieldList &list) const
	Appends references to all of this object's fields to resultList, and returns the number of fields appended.

virtual int	getAllFields (SoFieldList &list) const
	Returns a list of fields, including the eventIn's and eventOut's.

virtual SoField *	getField (const SbName &fieldName) const
	Returns a the field of this object whose name is fieldName.

virtual SoField *	getEventIn (const SbName &fieldName) const
	Returns a the eventIn with the given name.

virtual SoField *	getEventOut (const SbName &fieldName) const
	Returns the eventOut with the given name.

SbBool	getFieldName (const SoField *field, SbName &fieldName) const
	Returns the name of the given field in the fieldName argument.

SbBool	enableNotify (SbBool flag)
	Notification at this Field Container is enabled (if flag == TRUE) or disabled (if flag == FALSE).

SbBool	isNotifyEnabled () const
	Notification is the process of telling interested objects that this object has changed.

virtual void	setUserData (void *data)
	Sets application data.

void *	getUserData (void) const
	Gets user application data.

Public Member Functions inherited from SoBase
virtual SbName	getName () const
	Returns the name of an instance.

virtual void	setName (const SbName &name)
	Sets the name of an instance.

void	setSynchronizable (const bool b)
	Sets this to be a ScaleViz synchronizable object.

bool	isSynchronizable () const
	Gets the ScaleViz synchronizable state of this object.

Public Member Functions inherited from SoRefCounter
void	ref () const
	Adds a reference to an instance.

void	unref () const
	Removes a reference from an instance.

void	unrefNoDelete () const
	unrefNoDelete() should be called when it is desired to decrement the reference count, but not delete the instance if this brings the reference count to zero.

int	getRefCount () const
	Returns current reference count.

void	lock () const
	lock this instance.

void	unlock () const
	unlock this instance.

Public Member Functions inherited from SoTypedObject
SbBool	isOfType (const SoType &type) const
	Returns TRUE if this object is of the type specified in type or is derived from that type.

template<typename TypedObjectClass >
SbBool	isOfType () const
	Returns TRUE if this object is of the type of class TypedObjectClass or is derived from that class.

Static Public Member Functions
static SoType	getClassTypeId ()
	Returns the type identifier for this class.

static SbBool	isSupported (SoState *state=NULL)
	Returns TRUE if uniform grid clipping is supported by the graphics board.

static int	getMaxNumberOfUniformGrids (SoState *state=NULL)
	Returns the maximum number of clipping surfaces supported by the hardware.

Static Public Member Functions inherited from SoTexture2
static SoType	getClassTypeId ()
	Returns the type identifier for this class.

Static Public Member Functions inherited from SoTexture
static SoType	getClassTypeId ()
	Returns the type identifier for this class.

static SbBool	isSupported (HW_Feature feature)
	Returns information about hardware support for various texture features.

static SbRasterImage *	readTexture (const SbString &filename, FileType filetype=UNKNOWN)
	Convenience function that loads the image data from any texture file supported by Open Inventor and returns an SbRasterImage object.

Static Public Member Functions inherited from SoNode
static SoType	getClassTypeId ()
	Returns the type identifier for this class.

static SoNode *	getByName (const SbName &name)
	A node's name can be set using SoBase::setName().

static int	getByName (const SbName &name, SoNodeList &list)
	A node's name can be set using SoBase::setName().

Static Public Member Functions inherited from SoFieldContainer
static SoType	getClassTypeId ()
	Returns the type of this class.

Static Public Member Functions inherited from SoBase
static SoType	getClassTypeId ()
	Returns type identifier for this class.

Static Public Member Functions inherited from SoTypedObject
static SoType	getClassTypeId ()
	Returns the type identifier for this class.

Public Attributes
SoSFBox3f	extent
	Bounding box of the surface in 3D geometric coordinates.

SoSFEnum	axis
	Height axis: X, Y, or Z.

SoSFFloat	thickness
	Defines a clipping thickness in the axis direction.

SoSFBool	clipBelow
	Clip voxels below the surface.

SoSFBool	clipAbove
	Clip voxels above the surface.

SoSFFloat	undefinedValue
	Texels in the clipping texture with this value will clip all voxels above and below the surface.

Deprecated

SoDEPRECATED SoSFBox3f	size

Public Attributes inherited from SoTexture2
SoSFFilePathString	filename
	Name of the file from which to read texture image.

SoSFImage	image
	Contains an in-memory representation of the texture map.

SoSFEnum	wrapT
	Indicates what to do when texture coordinates in the T (vertical) direction lie outside the range 0-1.

SoSFEnum	loadingMode
	Specifies the loading mode.

SoSFNode	renderToTextureProperty
	Specifies an SoRenderToTextureProperty node containing a scene graph that will be rendered to create the texture image.

Public Attributes inherited from SoTexture
SoSFEnum	internalFormat
	Internal format for texture storage.

SoSFBool	enableCompressedTexture
	Enables storage of textures on the graphics board in compressed form.

SoSFEnum	wrapS
	Indicates what to do when texture coordinates in the S (horizontal) direction lie outside the range 0-1.

SoSFEnum	model
	Specifies how to map texture onto surface.

SoSFColor	blendColor
	Color used for BLEND model.

SoSFBool	enableBorder
	Enables borders for textures.

SoSFVec4f	borderColor
	Defines border color used for border texture filtering.

SoSFFloat	maxAnisotropy
	Specifies on a per-texture object basis, the maximum degree of anisotropy to account for in texture filtering.

SoSFEnum	minFilter
	Specifies the OpenGL minFilter.

SoSFEnum	magFilter
	Specifies the OpenGL magFilter.

Detailed Description

Clips a volume using a 2D surface.

The SoUniformGridClipping node specifies a clipping surface defined by a clipping axis (axis field),a bounding box (extent field) in world coordinates and a uniform scalar clipping grid (a 2D array of height values). This tool provides an efficient way for seismic applications to clip volume rendering against horizon surfaces (see also SoUniformGridProjectionClipping). A flat clipping surface with non-zero thickness can also be used in medical applications to implement "thick slice" rendering. The clipping grid does not need to have the same dimensions as the volume to be clipped (it will be sampled and interpolated). The clipping grid may be rotated and translated by standard Open Inventor transform nodes.

The height values are specified using a 2D texture. Each texel is a normalized value that, together with the extent, specifies a height. For integer valued textures, the range of the integer type (e.g. 0..255 for byte values) is normalized to the floating point range 0..1. For float valued textures the values should already be in the range 0..1. Each normalized value specifies a height based on the range of values in the extent box along the specified clipping axis. The default clipping axis is the Y axis.

NOTE: For integer valued textures this is similar to the way values are interpreted for the SoHeightFieldGeometry node. However for float valued textures it is quite different because the SoHeightFieldGeometry node interprets float values as actual height values and ignores the extent values.

It is also possible to specify an "undefined" value using the undefinedValue field. Texels with this value will clip all voxels above and below the surface. The default undefined value is Nan (Not a Number).

The X, Y and Z coordinates of the extent are in the same coordinate system as the volume extent. They specify the bounding box of the clipping surface and also the range of height values that can be specified with the normalized values in the height field texture. They are typically, but not necessariliy, set to the same values as the volume extent. The extent of the clipping surface may be larger than the volume extent. In this case the volume is only clipped where its extent overlaps with the surface. The extent of the clipping surface may also be smaller than the volume extent. In this case the volume is clipped to the "horizontal" extent of the clipping surface (the dimensions perpendicular to the clipping axis). However along the clipping axis the volume is only limited by the surface itself, not by its extent.

SoUniformGridClipping is derived from SoTexture2 , so the clipping grid texture can be specified by setting the filename field or by directly setting the image field. Directly setting the image field is convenient if the height field data is floating point. All the usual texturing parameters apply. Wrapping and filtering modes are particularly important. Setting wrap mode to something other than CLAMP_TO_EDGE may cause unwanted interpolation on edges. Setting filter mode to NEAREST will give a blocky result which may or may not be desired.

The format of the texture used for the grid should be the LUMINANCE* type for best performance. For example, a grayscale .png file will automatically be in this format. We suggest to use LUMINANCE_FLOAT32 explicitely for floating point data in order to preserve floating point precision. If no red component is available in the format used (for example ALPHA texture...), the grid will be totally flat.

Each clipping surface texture must be stored in a different OpenGL texture unit. One that is not currently used by VolumeViz for multi-data composition (i.e., a texture unit number greater than the highest dataSetId plus 1). Setting the texture unit for a clipping surface is done using the SoTextureUnit node, just like with any texture node.

The SoUniformGridProjectionClipping node provides an alternate way to specify the clipping grid. This node may be more convenient when clipping using surface geometry that is already in the scene graph, for example an SoHeightFieldRender node.

The figure below shows the result (right) of applying the left texture to a volume.

Clipping surface	Clipping applied to a volume

The following code shows one way to achieve this result. It loads the clipping surface "horizon2D.png" and puts it in texture unit 2:

: SoTextureUnit *texUnit2 = new SoTextureUnit();

texUnit2->unit = 2;

SoUniformGridClipping *grid = new SoUniformGridClipping();

grid->filename = "horizon2D.png";

SoSeparator* volSep = new SoSeparator();

volSep->addChild( volumeData );

volSep->addChild( transferFunction );

volSep->addChild( texUnit2 );

volSep->addChild( grid );

volSep->addChild( volumeRender );

root->addChild( volSep );

SoGroup::addChild
virtual void addChild(SoNode *child)
Adds a child as last one in group.

SoSeparator
Group node that saves and restores traversal state.
Definition SoSeparator.h:179

SoTexture2::filename
SoSFFilePathString filename
Name of the file from which to read texture image.
Definition SoTexture2.h:299

SoTextureUnit
<a href="IconLegend.html"><img src="extTGS.gif" alt="VSG extension" border="0"></a> Node that specif...
Definition SoTextureUnit.h:112

SoTextureUnit::unit
SoSFUInt32 unit
Specifies the texture unit identifier.
Definition SoTextureUnit.h:124

SoUniformGridClipping
<a href="IconLegend.html"><img src="extVR.gif" alt="VolumeViz" border="0"></a> Clips a volume using ...
Definition SoUniformGridClipping.h:253

SoUniformGridClipping::SoUniformGridClipping
SoUniformGridClipping()
Constructor.

The uniform grid clipping node provides both clipAbove and clipBelow boolean fields. By default only clipAbove is true. Using a pair of grid clipping nodes, one with clipAbove and one with clipBelow, allows clipping between two surfaces. This is useful in seismic applications to clip between two "horizon" surfaces. Note that if both of these fields are true and the thickness field is zero then the entire volume will be clipped.

The thickness field expands the clipping surface in both directions perpendicular to the surface.The value of this field is specified in 0..1 normalized units spanning the specified extent of the surface. A completely flat clipping surface with thickness greater than zero can be used to implement "thick slice" (aka "thin slab") rendering. A transform node, for example SoTransform , can be used to position and orient the clipping surface. In this case the transform node and the clipping surface node should usually be placed under an SoTransformSeparator node. This allows the surface to clip the volume primitives, but prevents the transform node from affecting the volume primitives. Remember that, as usual, the transform node will rotate the clipping surface around the origin (0,0,0) of the world coordinate system.

Clipping surface thicknes

Notes:

When using a custom SoVolumeShader with this node and redefining the main() function, you must call VVizClipVoxel() in the main() function if you are writing a fragment shader or VVizCalcDistToUniformGrid() if it's a vertex shader. If you don't do this, you will get a GLSL compilation error or clipping won't work.

Limitations:

Only graphics cards supporting the GLSL language can use this node.
The maximum number of SoUniformGridClipping nodes that can be applied to the same volume is limited to getMaxNumberOfUniformGrids(). This limitation depends on the maximum number of sets of OpenGL texture coordinates supported on the graphics board (GL_MAX_TEXTURE_COORDS), which is typically 8, minus 3 sets used elsewhere in VolumeViz, leaving 5 for uniform grids.

FILE FORMAT/DEFAULT

axis	Y
extent	-1,0,-1 1,1,1
filename	""
image	0 0 0
wrapS	CLAMP_TO_EDGE
wrapT	CLAMP_TO_EDGE
model	MODULATE
enableCompressedTexture	FALSE
blendColor	0 0 0
enableBorder	FALSE
borderColor	0 0 0 0
maxAnisotropy	1.0
minFilter	AUTO
magFilter	AUTO
loadingMode	AUTO
useAutoMipmap	FALSE
internalFormat	AUTO_INTERNAL_FORMAT
thickness	0
clipBelow	FALSE
clipAbove	TRUE

Member Enumeration Documentation

◆ Axis

enum SoUniformGridClipping::Axis

Slice Axis.

Enumerator
X	X Axis.
Y	Y Axis (Default)
Z	Z Axis.

Definition at line 273 of file SoUniformGridClipping.h.

Constructor & Destructor Documentation

◆ SoUniformGridClipping()

SoUniformGridClipping::SoUniformGridClipping ( )

Constructor.

Member Function Documentation

◆ getClassTypeId()

static SoType SoUniformGridClipping::getClassTypeId ( )

static

Returns the type identifier for this class.

◆ getMaxNumberOfUniformGrids()

static int SoUniformGridClipping::getMaxNumberOfUniformGrids ( SoState * state = NULL )

static

Returns the maximum number of clipping surfaces supported by the hardware.

◆ getTypeId()

virtual SoType SoUniformGridClipping::getTypeId ( ) const

virtual

Returns the type identifier for this specific instance.

Reimplemented from SoTexture2.

Reimplemented in SoUniformGridProjectionClipping.

◆ isSupported()

static SbBool SoUniformGridClipping::isSupported ( SoState * state = NULL )

static

Returns TRUE if uniform grid clipping is supported by the graphics board.

The GPU must support GLSL. Check the maximum number of clipping surfaces using getMaxNumberofUniformGrids.

When using a debug build of Open Inventor, some "no context available" warning messages may be generated. You can ignore them or see SoGLExtension for an example of using SoGLContext to avoid them.

Member Data Documentation

◆ axis

SoSFEnum SoUniformGridClipping::axis

Height axis: X, Y, or Z.

Use enum Axis . Default is Y.

NOTE: field available since Open Inventor 8.0

Definition at line 288 of file SoUniformGridClipping.h.

◆ clipAbove

SoSFBool SoUniformGridClipping::clipAbove

Clip voxels above the surface.

Default is TRUE;

NOTE: field available since Open Inventor 8.6

Definition at line 320 of file SoUniformGridClipping.h.

◆ clipBelow

SoSFBool SoUniformGridClipping::clipBelow

Clip voxels below the surface.

Default is FALSE;

NOTE: field available since Open Inventor 8.6

Definition at line 312 of file SoUniformGridClipping.h.

◆ extent

SoSFBox3f SoUniformGridClipping::extent

Bounding box of the surface in 3D geometric coordinates.

Default is a box of size (2, 1, 2) with its back left corner at (-1, 0, -1).
NOTE: field available since Open Inventor 8.0

Definition at line 270 of file SoUniformGridClipping.h.

◆ size

SoDEPRECATED SoSFBox3f SoUniformGridClipping::size

Definition at line 349 of file SoUniformGridClipping.h.

◆ thickness

SoSFFloat SoUniformGridClipping::thickness

Defines a clipping thickness in the axis direction.

Ignored if set to 0. Default is 0;

Value is in the normalized extent space (can be seen as a percentage of the extent).

Notes:

If thickness is 0 and clipBelow and clipAbove are both TRUE then the whole volume is clipped.
A value greater than 1.0 makes sense only if the extent of the SoUniformGridClipping is smaller than the extent of the volume data it applies to.

NOTE: field available since Open Inventor 8.6

Definition at line 304 of file SoUniformGridClipping.h.

◆ undefinedValue

SoSFFloat SoUniformGridClipping::undefinedValue

Texels in the clipping texture with this value will clip all voxels above and below the surface.

Default is NaN (not a number).

NOTE: field available since Open Inventor 9.0

Definition at line 328 of file SoUniformGridClipping.h.

The documentation for this class was generated from the following file:

VolumeViz/nodes/SoUniformGridClipping.h

Open Inventor Release 2024.1.3

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Detailed Description

FILE FORMAT/DEFAULT

SEE ALSO

Member Enumeration Documentation

◆ Axis

Constructor & Destructor Documentation

◆ SoUniformGridClipping()

Member Function Documentation

◆ getClassTypeId()

◆ getMaxNumberOfUniformGrids()

◆ getTypeId()

◆ isSupported()

Member Data Documentation

◆ axis

◆ clipAbove

◆ clipBelow

◆ extent

◆ size

◆ thickness

◆ undefinedValue