Class SoDragPointDragger

  • All Implemented Interfaces:
    SafeDisposable

    public class SoDragPointDragger
    extends SoDragger
    Object you can translate in 3D by dragging with the mouse. SoDragPointDragger is a compound dragger that translates in all three dimensions when dragged with the mouse.

    It is made up of six smaller draggers, which it displays two at a time. Each pair has one plane dragger and one line dragger. The line dragger is oriented perpendicular to the plane, so together the plane/line pair lets you move through all of 3-space.

    DragPoint has a total of three such pairs, oriented along the x, y, and z axes of its local space. You can cycle through the three pairs by hitting the <Control> key with the cursor over the dragger. (You need not press the mouse button.) This behavior may be disabled by setting the environment variable OIV_DISABLE_DRAGGER_CTRL_KEY to true (see SoPreferences). An application can cycle through the pairs by calling the showNextDraggerSet method or display a specific pair by calling the showDraggerSet method. The dragger starts with the Y axis (y-line/xz-plane) pair displayed.

    The line draggers are SoTranslate1Draggers and the plane draggers are SoTranslate2Draggers. So you can use the <Shift> key to constrain the motion of a plane dragger along one of the two axes within the plane, as described in the SoTranslate2Draggers reference page.

    DragPoint adds extra feedback parts to provide a more intuitive idea of where you are placed in three-space. There are three feedback planes and three feedback axes ; each corresponds to one of the plane or line draggers, but spans a much greater distance. When you drag along a line, that line's larger feedback axis is displayed, and remains anchored in space while the dragger slides along it. This helps establish the motion of the dragger relative to the rest of the scene. Similarly, when you drag within a plane, the larger (but transparent) feedback plane establishes a ground plane for you to move upon. The location of the dragger within the plane is pinpointed by two intersecting axes that always cross below the cursor and extend to the edges of the plane. When you move dragPoint to the edge of the feedback plane (or line), the feedback will jump to a new location in that direction, so that the dragger never leaves the feedback behind.

    The primary directions of motion are given by the local space of the dragger. Transforms earlier in the scene will affect the dragger, its children, and the orientation of its directions of motion.

    This node has a translation field which always reflects its position in local space. Setting the field moves the dragger to that point. You can also connect fields of other nodes or engines from this one to make them follow the dragger's motion.

    Although the child draggers each have their own resources defining default part geometries, the dragPoint dragger overrides these with a new set of resources. It also defines resources for the feedback parts that it adds. These are detailed in the Dragger Resources section of the online reference page for this class. You can change the parts in any instance of this dragger using setPart().

    You can make your program use different default resources for the parts by copying the file $OIVHOME/data/draggerDefaults/dragPointDragger.iv into your own directory, editing the file, and then setting the environment variable SO_DRAGGER_DIR to be a path to that directory.

    See SoDragger for more information about using and customizing draggers, including code examples, using draggers in an immersive VR environment and using WYSIWYG draggers.

    File format/default:

    DragPointDragger {

      boundingBoxCaching AUTO
      renderCulling AUTO
      pickCulling AUTO
      isActive false
      translation 0 0 0
      callbackList NULL
      xTranslator Translate1Dragger {
      }
      xyTranslator Translate2Dragger {
      }
      xzTranslator Translate2Dragger {
      }
      zTranslator Translate1Dragger {
      }
      yzTranslator Translate2Dragger {
      }
      yTranslator Translate1Dragger {
      }
      xFeedback <dragPointXFeedback resource>
      yFeedback <dragPointYFeedback resource>
      zFeedback <dragPointZFeedback resource>
      yzFeedback <dragPointYZFeedback resource>
      xzFeedback <dragPointXZFeedback resource>
      xyFeedback <dragPointXYFeedback resource>
      xTranslator.translator <dragPointXTranslatorTranslator resource>
      xTranslator.translatorActive <dragPointXTranslatorTranslatorActive resource>
      yTranslator.translator <dragPointYTranslatorTranslator resource>
      yTranslator.translatorActive <dragPointYTranslatorTranslatorActive resource>
      zTranslator.translator <dragPointZTranslatorTranslator resource>
      zTranslator.translatorActive <dragPointZTranslatorTranslatorActive resource>
      yzTranslator.translator <dragPointYZTranslatorTranslator resource>
      yzTranslator.translatorActive <dragPointYZTranslatorTranslatorActive resource>
      xzTranslator.translator <dragPointXZTranslatorTranslator resource>
      xzTranslator.translatorActive <dragPointXZTranslatorTranslatorActive resource>
      xyTranslator.translator <dragPointXYTranslatorTranslator resource>
      xyTranslator.translatorActive <dragPointXYTranslatorTranslatorActive resource>
    }

    DRAGGER RESOURCES

      Resource: dragPointXTranslatorTranslator
      Part: xTranslator.translator
      Appearance: white cylinder with axis aligned in X direction
      Description: picking this initiates linear motion in X direction

      Resource: dragPointXTranslatorTranslatorActive
      Part: xTranslator.translatorActive
      Appearance: yellow cylinder with axis aligned in X direction
      Description: shown when moving in X direction

      Resource: dragPointYTranslatorTranslator
      Part: yTranslator.translator
      Appearance: white cylinder with axis aligned in Y direction
      Description: picking this initiates linear motion in Y direction

      Resource: dragPointYTranslatorTranslatorActive
      Part: yTranslator.translatorActive
      Appearance: yellow cylinder with axis aligned in Y direction
      Description: shown when moving in Y direction

      Resource: dragPointZTranslatorTranslator
      Part: zTranslator.translator
      Appearance: white cylinder with axis aligned in Z direction
      Description: picking this initiates linear motion in Z direction

      Resource: dragPointZTranslatorTranslatorActive
      Part: zTranslator.translatorActive
      Appearance: yellow cylinder with axis aligned in Z direction
      Description: shown when moving in Z direction

      Resource: dragPointYZTranslatorTranslator
      Part: yzTranslator.translator
      Appearance: white flattened cube within the yz plane of motion
      Description: picking this initiates planar motion in yz plane

      Resource: dragPointYZTranslatorTranslatorActive
      Part: yzTranslator.translatorActive
      Appearance: yellow flattened cube within the yz plane of motion
      Description: shown when moving in yz plane

      Resource: dragPointXZTranslatorTranslator
      Part: xzTranslator.translator
      Appearance: white flattened cube within the xz plane of motion
      Description: picking this initiates planar motion in xz plane

      Resource: dragPointXZTranslatorTranslatorActive
      Part: xzTranslator.translatorActive
      Appearance: yellow flattened cube within the xz plane of motion
      Description: shown when moving in xz plane

      Resource: dragPointXYTranslatorTranslator
      Part: xyTranslator.translator
      Appearance: white flattened cube within the xy plane of motion
      Description: picking this initiates planar motion in xy plane

      Resource: dragPointXYTranslatorTranslatorActive
      Part: xyTranslator.translatorActive
      Appearance: yellow flattened cube within the xy plane of motion
      Description: shown when moving in xy plane

      Resource: dragPointXFeedback
      Part: xFeedback
      Appearance: douple-headed purple arrow
      Description: feedback for motion in x direction

      Resource: dragPointYFeedback
      Part: yFeedback
      Appearance: douple-headed purple arrow
      Description: feedback for motion in y direction

      Resource: dragPointZFeedback
      Part: zFeedback
      Appearance: douple-headed purple arrow
      Description: feedback for motion in z direction

      Resource: dragPointYZFeedback
      Part: yzFeedback
      Appearance: semi-transparent green square in yz plane
      Description: feedback for motion in yz plane

      Resource: dragPointXZFeedback
      Part: xzFeedback
      Appearance: semi-transparent green square in yz plane
      Description: feedback for motion in xz plane

      Resource: dragPointXYFeedback
      Part: xyFeedback
      Appearance: semi-transparent green square in yz plane
      Description: feedback for motion in xy plane

    CATALOG PARTS

    All Parts

      Part NamePart TypeDefault TypeNULL Default
      callbackList NodeKitListPart yes
      xTranslator Translate1Dragger yes
      xyTranslator Translate2Dragger yes
      xzTranslator Translate2Dragger yes
      zTranslator Translate1Dragger yes
      yzTranslator Translate2Dragger yes
      yTranslator Translate1Dragger yes
      xFeedback Separator yes
      yFeedback Separator yes
      zFeedback Separator yes
      yzFeedback Separator yes
      xzFeedback Separator yes
      xyFeedback Separator yes

    Extra Information for List Parts from Above Table

      Part NameContainer TypePossible Types
      callbackList Separator Callback, EventCallback

    See Also:
    SoInteractionKit, SoDragger, SoCenterballDragger, SoDragPointDragger, SoHandleBoxDragger, SoJackDragger, SoPointLightDragger, SoRotateCylindricalDragger, SoRotateDiscDragger, SoRotateSphericalDragger, SoScale1Dragger, SoScale2Dragger, SoScale2UniformDragger, SoScaleUniformDragger, SoSpotLightDragger, SoTabBoxDragger, SoTabPlaneDragger, SoTrackballDragger, SoTransformBoxDragger, SoTransformerDragger, SoTranslate1Dragger, SoTranslate2Dragger
    • Field Detail

      • translation

        public final SoSFVec3f translation
        Position of the dragger.
    • Constructor Detail

      • SoDragPointDragger

        public SoDragPointDragger()
        Constructor.
    • Method Detail

      • setJumpLimit

        public void setJumpLimit​(float limit)
        Sets the point at which the feedback axes will jump to a new position. For example, if set to .1 (the default), the feedback axes will jump when the dragger gets within 10% of the end of the axis.
      • showDraggerSet

        public void showDraggerSet​(SoDragPointDragger.DraggerSets set)
        The dragPoint dragger contains three pairs of draggers, each containing a plane dragger and a line dragger (see the Description above). By default the Y axis (y-line/xz-plane) pair is displayed. Calling this method selects a specific pair.
      • showNextDraggerSet

        public void showNextDraggerSet()
        The dragPoint dragger contains three pairs of draggers, each containing a plane dragger and a line dragger (see the Description above). The dragger starts with the (y-line/xz-plane) pair displayed. Calling this method will cycle next through the (z-line/xy-plane), then the (x-line/yz-plane).
      • getJumpLimit

        public float getJumpLimit()
        Gets the point at which the feedback axes will jump to a new position.